1. Let's unpack AEOLUS' latest CB-941GT car blower today.
2. You can find the following items in the box.
a. The User Manual
b. The 26-feet flexible hose
c. Two rubberized nozzles
d. A heat insulation sleeve
e. The CB-941GT power unit
3. Next, we will assemble the machine, getting the Aeolus Car Dryer CB-941GT ready for use is very simple.
You can see that the front of our car blower is threaded, just insert the flexible Hose into the Power Unit and twist counter-clockwise to tighten. No linking parts are needed and the sealing is very good and will not leak air.
4. Next, put the heat insulation sleeve over the flexible hose, it can provide extra protection on your forearms.
Then, attach the nozzle of your choice to the other end of the flexible hose. Follow the same protocol as before, lining up the insert and twisting tight.
5. You can see that the nozzle is a double layer design and there is also a layer of rubber on the front of the nozzle. It not merely cools down the holding part in your hand to avoid overheating but also eliminates the chance of scratching car paint.
6. When it is time to clean out your Air Filter, simply remove the air filter out, clean it and put it back.
7. Then you can see 16-feet outlet cable and 4 smooth maneuvering casters, you can move it anywhere you need.
8. You’ve got a nice big power switch for easy On/Off duties and adjustable wind speed and heating knobs.You can easily adjust the variable wind force and heater power by rotating the knobs.
9. Now get Aeolus car blower Drying!